SWITCHBOARD System Online USV 10 - 240 kVA

MODEL

SWB 10

SWB 15

SWB 20

SWB 30

SWB 40

Input

Capacity

10KVA

10KW

15KVA

15KW

20KVA

20KW

30KVA

30KW

40KVA

40KW

Phase

3 Phase 4 Wires and Ground

Rated Voltage

380/400/415Vac

Voltage Range

208~478Vac

Frequency Range

45-55Hz a 50Hz / 56-66Hz a 60Hz (auto sensing)

Power Factor

≥0.99

Current THDi

≤2%(100% non linear load)

Bypass Voltage Range

Max Voltage.: 220Vac:+25% (optional +5%,+10%,+15% )

230Vac:+20% (optional +10%,+15% ) 240Vac:+15% (optional +10% )

Min. Voltage.: -45% (optional -20%、-30%)

Frequency protection range: ±10%

Generator Input

Supported

Output

Phase

3 Phase 4 Wires and Ground

Rated Voltage

380/400/415Vac

Power Factor

1.0

Voltage Regulation

±1%

Frequency

Utility Mode

±1%、±2%、±4%、±5%、±10% of the rated frequency (optional)

Battery Mode

(50/60±0.1%)Hz

Crest Factor

3:1

THD

≤1% with linear load

≤3% with non linear load

Efficiency (in normal mode)

≥94%

Battery

Voltage

Standard UPS: ±120Vdc (10+10) 12V 7/9AH

Long run backup UPS ±96V/±108V/±120Vdc (16/18/20 pz. optional)

Standard UPS:

±240Vdc (20+20) 12V 7/9AH

Long run backup UPS:

±192/±204/±216/±22

8/±240Vdc (32/34/36/38/40

pz optional)

Charge Current (A)

Charge current is automatically set in according to the capacity and the quantity of the batteries

Standard UPS (20pcs): 1,35A Standard UPS (2X20pcs): 2,7A Standard UPS (3X20pcs): 4,5A

Long run backup UPS: max 10A

Battery Test

Supported

Transfer Time

Utility to Battery: 0ms Utility to bypass: 0ms

MODEL

SWB 10

SWB 15

SWB 20

SWB 30

SWB 40

Protection

Overload

AC Mode

Load ≤ 110%: last 60min, ≤ 125%: last 10min, ≤ 150%: last 1min, ≥ 150% change to bypass immediately

Battery Mode

Load ≤ 110%: last 10min, ≤ 125%: last 1min, ≤ 150%: last 10s, ≥ 150% shut down UPS immediately

Bypass Mode

Breaker 20A

Breaker 32A

Breaker 40A

Breaker 63A

Breaker 80A

Short Circuit

Involves the whole UPS

Overheat

Line Mode: Switch to Bypass, Backup Mode: Shut down UPS immediately

Battery Low

Alarm and switch off UPS

Self-diagnostics

Upon Power On and Software Control

EPO (optional)

Shut down UPS immediately

Battery

Advanced Battery Management

Noise Suppression

Complies with EN62040-2

Alarms

Audible & Visual

Line Failure, Battery Low, Overload, System Fault

Display

Status LED & LCD

Line Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault

Reading on the LCD

Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature etc.

Communication Interface

USB, RS485, Parallel (optional), Coupler dry contact, Intelligent slot, SNMP card (optional), Relay card (optional)

Environment

Operating Temperature

0°C～40°C

Storage Temperature

-25°C～55°C

Humidity

0～95% non condensing

Altitude

< 1500m

When >1500m lower the rated power for use

Noise

< 55dB

< 58dB

Other

Dimensions (D×W×H)

Weight (Kg)

(without batteries)

N° of unit

Safety Conformance

IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3, EN60950-1, IEC/EN 50171

Frequency Converter function

Yes