POLARIS CPSS USV 10.000 - 120.000 VA

MODEL

POLARIS 10

POLARIS 15

POLARIS 20

POLARIS 30

POLARIS 40

Input

Capacity

10KVA

10KW

15KVA

15KW

20KVA

20KW

30KVA

30KW

40KVA

40KW

Phase

3 Phase 4 Wires and Ground

Rated Voltage

380/400/415Vac

Voltage Range

208~478Vac

Frequency Range

45-55Hz a 50Hz / 56-66Hz a 60Hz (auto sensing)

Power Factor

≥0.99

Current THDi

≤2%(100% non linear load)

Bypass Voltage Range

Max Voltage.: 220Vac:+25% (optional +5%,+10%,+15% )

230Vac:+20% (optional +10%,+15% ) 240Vac:+15% (optional +10% )

Min. Voltage.: -45% (optional -20%、-30%)

Frequency protection range: ±10%

Generator Input

Supported

Output

Phase

3 Phase 4 Wires and Ground

Rated Voltage

380/400/415Vac

Power Factor

1.0

Voltage Regulation

±1%

Frequency

Utility Mode

±1%、±2%、±4%、±5%、±10% of the rated frequency (optional)

Battery Mode

(50/60±0.1%)Hz

Crest Factor

3:1

THD

≤1% with linear load

≤3% with non linear load

Efficiency (in normal mode)

≥94%

Battery

Voltage

Standard UPS: ±120Vdc (10+10) 12V 7/9AH

Long run backup UPS ±96V/±108V/±120Vdc (16/18/20 pz. optional)

Standard UPS:

±240Vdc (20+20) 12V 7/9AH

Long run backup UPS:

±192/±204/±216/±22

8/±240Vdc (32/34/36/38/40

pz optional)

Charge Current (A)

Charge current is automatically set in according to the capacity and the quantity of the batteries

Standard UPS (20pcs): 1,35A Standard UPS (2X20pcs): 2,7A Standard UPS (3X20pcs): 4,5A

Long run backup UPS: max 10A

Battery Test

Supported

Transfer Time

Utility to Battery: 0ms Utility to bypass: 0ms

MODEL

POLARIS 10

POLARIS 15

POLARIS 20

POLARIS 30

POLARIS 40

Protection

Overload

AC Mode

Load ≤ 110%: last 60min, ≤ 125%: last 10min, ≤ 150%: last 1min, ≥ 150% change to bypass immediately

Battery Mode

Load ≤ 110%: last 10min, ≤ 125%: last 1min, ≤ 150%: last 10s, ≥ 150% shut down UPS immediately

Bypass Mode

Breaker 20A

Breaker 32A

Breaker 40A

Breaker 63A

Breaker 80A

Short Circuit

Involves the whole UPS

Overheat

Line Mode: Switch to Bypass, Backup Mode: Shut down UPS immediately

Battery Low

Alarm and switch off UPS

Self-diagnostics

Upon Power On and Software Control

EPO (optional)

Shut down UPS immediately

Battery

Advanced Battery Management

Noise Suppression

Complies with EN62040-2

Alarms

Audible & Visual

Line Failure, Battery Low, Overload, System Fault

Display

Status LED & LCD

Line Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault

Reading on the LCD

Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature etc.

Communication Interface

USB, RS485, Parallel (optional), Coupler dry contact, Intelligent slot, SNMP card (optional), Relay card (optional)

Environment

Operating Temperature

0°C～40°C

Storage Temperature

-25°C～55°C

Humidity

0～95% non condensing

Altitude

< 1500m

When >1500m lower the rated power for use

Noise

< 55dB

< 58dB

Other

Dimensions (D×W×H)

828x250x868

Weight (Kg)

(without batteries)

42

45

45

71

73

N° of unit

1

Safety Conformance

IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3, EN60950-1, IEC/EN 50171

Frequency Converter function

Yes

MODEL

POLARIS 60

POLARIS 80

POLARIS 100

POLARIS 120

POLARIS 160

POLARIS 180

Input

Power (KVA/KW)

60/60

80/80

100/100

120/120

160/160

180/180

Phase

3 Phase + Neutral + Ground

Rated Voltage

380/400/415Vac

Voltage Range

138~485Vac

208~478Vac

138~485Vac

208~478Vac

Frequency Range

45-55Hz at 50Hz / 56-66Hz at 60Hz (auto sensing)

Power Factor

≥0.99

Current THDi

≤2% (100% not linear load)

Bypass Voltage Range

Max Voltage.: 220Vac:+25% (optional +10%,+15%,+20% )

230Vac:+20% (optional +10%,+15% ) 240Vac:+15% (optional +10% )

Min. Voltage.: -45% (optional -20%,-30%)

Frequency protection range: ±10%

Generator Input

Supported

Output

Phase

3 Phase + Neutral + Ground

Rated Voltage

380/400/415Vac

Power Factor

1.0

Voltage Regulation

±1%

Frequency

Utility Mode

Synchronized with input. When input frequency is> ± 10% (±1%, ±2%, ±4%,

±5%, optional) output (50/60±0.1%)Hz

Battery Mode

(50/60±0.1%) Hz

Crest Factor

3:1

THD

≤1% with linear load

≤3% with not linear load

Efficiency (in normal mode)

≥94%

Battery

Voltage

60/120 models:

±180V/±192V/±204V/±216V/±228V/±240/±252/±264/±276/±288/±300Vdc

(30/32/34/36/38/40/42/44/46/48/50pcs optional) 360Vdc~600Vdc (30~50 pcs) 36 pcs standard, 36~50pz Output PF 1; 32~34pz

Output PF 0.9; 30pz Output PF0.8) 80/100/160/180 models:

±192/±204/±216/±228/±240Vdc (32/34/36/38/40pz optional)

Charge Current (A)

Charge current is automatically set in according to the capacity and the quantity of the batteries

Max 30A

Battery Test

Supported

Transfer Time

Utility to Battery: 0ms Utility to bypass: 0ms

MODEL

POLARIS 60

POLARIS 80

POLARIS 100

POLARIS 120

POLARIS 160

POLARIS 180

Protection

Overload

Load ≤ 110%: last 60min, ≤ 125%: last 10min, ≤ 150%: last 1min, ≥ 150% change to bypass immediately

Alarms

Audible & Visual

Line Failure, Battery Low, Overload, System Fault etc.

Display

Status LED & LCD

Line Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault

Shows on the LCD

Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage & Inner Temperature etc.

Communication Interface

USB, RS232, RS485, REPO, Parallel (optional), Optocoupler contact, Intelligent slot, SNMP card (optional), Relay card (optional)

Environment

Operating Temperature

0°C~40°C

Storage Temperature

-25°C~55°C (without batteries)

Humidity

0~95% not condensing

Altitude

< 1500m, when >1500m lower the rated power for use

Noise

< 60dB

Other

UPS Dimension (D×W×H) cm

828x250x868

828x360x868

828x250x868

828x360x868

UPS weight (Kg)

without batteries

83

123

83

123

Unit N°

1

2

Safety Conformance

IEC/EN62040-1, IEC/EN62040-2, IEC/EN62040-3, IEC/EN60950-1

Frequency Converter function

YES